Water-cooled rotary vane compressor
ROW 40-460 G
ROW 40-460 G
Water-cooled rotary vane compressor for transporting gases in a wide range of applications
- Capacity up to 3,000 m³/hr
- Pressure from 3.5 to 15 bar (abs.)
Share
Technology
- Suction-side inlet pressure up to 2.5 bar (abs.)
- Maximum pressure 15 bar (abs.)
- Optimal energy efficiency at specified operating point
- Direct drive via coupling
- Maximum reduction of residual oil content to 0.003 mg / m³ using post-filters
- Frequency controllable between 30 and 60 Hz
- Limp-home capability
- Single shaft
- Simple and rugged design with few rotating parts
- Low rotational speed: 1,480 rpm
- Low noise and vibration
- Small footprint
- Foundation-free installation
Cost Efficiency
- High efficiency at high availability
- Low energy consumption
- Generating low heat at about 80° C
- Heat recovery of up to 75 % of the shaft power
- Exceptional safety standard
- Up to 100,000 operating hours without overhaul
- Long service life of bearings and rotors
- Bearings can be changed on site
- Easy to install
Highlights
- Customer specific design of systems
- Implementation of special solutions
- Design, planning and manufacturing of complete system solutions for numerous gas and offshore applications
ATEX
Suitable for transporting explosive gases and vapors in explosion group IIB, temperature class T3 in zone 1. It can be operated in zone 1.
II inside 2G c IIB T3,
II outside 2G c IIB T3
Service
Service and maintenance are costly and time consuming necessities. To keep your costs down we offer hands-on workshops for your technicians to empower them to carry out service fast and efficiently at your plant. Successful attendance of our in-depth trainings for ATEX machines is rewarded with a certificate. If your machine actually breaks down we provide fast and efficient support from the factory.
Features
Technology
- Suction-side inlet pressure up to 2.5 bar (abs.)
- Maximum pressure 15 bar (abs.)
- Optimal energy efficiency at specified operating point
- Direct drive via coupling
- Maximum reduction of residual oil content to 0.003 mg / m³ using post-filters
- Frequency controllable between 30 and 60 Hz
- Limp-home capability
- Single shaft
- Simple and rugged design with few rotating parts
- Low rotational speed: 1,480 rpm
- Low noise and vibration
- Small footprint
- Foundation-free installation
Cost Efficiency
- High efficiency at high availability
- Low energy consumption
- Generating low heat at about 80° C
- Heat recovery of up to 75 % of the shaft power
- Exceptional safety standard
- Up to 100,000 operating hours without overhaul
- Long service life of bearings and rotors
- Bearings can be changed on site
- Easy to install
Highlights
- Customer specific design of systems
- Implementation of special solutions
- Design, planning and manufacturing of complete system solutions for numerous gas and offshore applications
ATEX
Suitable for transporting explosive gases and vapors in explosion group IIB, temperature class T3 in zone 1. It can be operated in zone 1.
II inside 2G c IIB T3,
II outside 2G c IIB T3
Parts & Service
Service
Service and maintenance are costly and time consuming necessities. To keep your costs down we offer hands-on workshops for your technicians to empower them to carry out service fast and efficiently at your plant. Successful attendance of our in-depth trainings for ATEX machines is rewarded with a certificate. If your machine actually breaks down we provide fast and efficient support from the factory.